Light Scaring Using Moulds

Products/equipment needed:

• Barrier/Shielding product (optional)
• A mould
• Petrolease Spray
• Vaseline
• Prosaide
• Pro-clean remover 
• Witch Hazel 
• Supracolor palette
• Fixing Spray 
• Translucent powder 

1. Apply prosaide to clean skin and prosthetic and wait until the glue goes clear (it will appear white when first applied)

2. Once the glue is clear press prosthetic firmly onto the skin and hold

3. Using witch hazel and a baby bud, apply around the edges of the prosthetic to melt down and make them appear less visible on the skin

4. Once the edges have been blended, powder the prosthetic and start applying the appropriate colour using the supracolor palette, making it look as realistic as possible

5. Apply some fake blood and/or wound filler

6. Once all the colour is applied use the fixing spray to set the colour on the prosthetic 

7. To remove the prosthetic, peel off the prosthetic and lightly apply and rub on some Pro-clean remover to remove the remaining glue on the skin